%PDF-
%PDF-
Mini Shell
Mini Shell
Direktori : / scripts /
Current File : //scripts/securetmp
#!/usr/local/cpanel/3rdparty/bin/perl
# Copyright 2025 WebPros International, LLC
# All rights reserved.
# copyright@cpanel.net http://cpanel.net
# This code is subject to the cPanel license. Unauthorized copying is prohibited.
use strict;
use warnings;
use Cpanel::TempFile ();
use Cpanel::SafeFile ();
use Cpanel::Filesys::FindParse ();
use Cpanel::DiskLib ();
use Getopt::Long;
use Cpanel::Logger ();
use Cpanel::SafeRun::Errors ();
use Cpanel::SafeRun::Simple ();
use Cpanel::Filesys::Mounts ();
use Cpanel::Config::LoadCpConf ();
my $logger = Cpanel::Logger->new();
$| = 1; ## no critic qw(RequireLocalizedPunctuationVars)
my $has_loop_device = 0;
my $install = 0; # Add securetmp to system startup
my $uninstall = 0; # Remove from system startup
my $auto = 0; # Secure /tmp and /var/tmp
my $daemonize = 1;
my $help = 0;
# Get command line options
GetOptions( 'auto' => \$auto, 'install' => \$install, 'uninstall' => \$uninstall, 'daemonize!' => \$daemonize, 'help' => \$help );
if ($help) {
print <<"MANUAL";
$0 - secure /tmp and /var/tmp
Options:
- auto: skip interactive customization questions
- install: install & enable securetmp service
- uninstall: disable & uninstal securetmp service
- daemonize: run securetmp in background ( default true )
Sample usages:
# run in interactive mode
> $0
# disable interactive mode, run in background
> $0 --auto
# disable interactive mode, do not run in background
> $0 --auto --nodaemonize
MANUAL
exit;
}
if ( -e '/var/cpanel/version/securetmp_disabled' ) {
print "[securetmp] Disabled per /var/cpanel/version/securetmp_disabled\n";
exit;
}
elsif ( -e '/var/cpanel/disabled/securetmp' ) {
print "[securetmp] Disabled per /var/cpanel/disabled/securetmp\n";
exit;
}
elsif ( -e '/var/cpanel/dev_sandbox' ) {
print "[securetmp] Disabled on development sandboxes\n";
exit;
}
# do check for loopback module for Linux based VPS
my @modules = Cpanel::SafeRun::Errors::saferunallerrors('lsmod');
$has_loop_device = check_loop_device();
if ( !grep /loop/, @modules ) {
print "*** Notice *** No loop module detected\n"; # could be built into kernel, so don't bail out yet
print "If the loopback block device is built as a module, try running `modprobe loop` as root via ssh and running this script again.\n";
print "If the loopback block device is built into the kernel itself, you can ignore this message.\n";
}
if ( !$has_loop_device ) {
print "*** Notice *** No working loopback device files found. Try running `modprobe loop` as root via ssh and running this script again.\n";
exit(0);
}
# Start interactive setup
if ( !$auto && !$install && !$uninstall && -t STDIN ) {
print 'Would you like to secure /tmp & /var/tmp at boot time? (y/n) ';
my $answer;
chomp( $answer = <STDIN> );
if ( $answer =~ m/^y/i ) {
$install = 1;
}
else {
print "securetmp will not be added to system startup at this time.\n";
}
undef $answer;
if ( !$install ) {
print 'Would you like to disable securetmp from the system startup? (y/n) ';
chomp( $answer = <STDIN> );
if ( $answer =~ m/^y/i ) {
$uninstall = 1;
}
else {
print "securetmp will not be removed from system startup.\n";
}
undef $answer;
}
print 'Would you like to secure /tmp & /var/tmp now? (y/n) ';
chomp( $answer = <STDIN> );
if ( $answer =~ m/^y/i ) {
$auto = 1;
}
else {
print "/tmp & /var/tmp will not be secured at this time.\n";
}
exit if ( !$install && !$auto && !$uninstall );
}
elsif ( !$auto && !$install && !$uninstall ) {
exit 1;
}
## ADD/REMOVE from startup
#-----------------------------------------------------------------
if ( !-x '/usr/local/cpanel/scripts/cpservice' ) {
$logger->warn("cpservice is not available. Please check its status.");
}
else {
# Remove securetmp from system startup
if ($uninstall) {
Cpanel::SafeRun::Simple::saferun( '/usr/local/cpanel/scripts/cpservice', 'securetmp', 'stop' );
Cpanel::SafeRun::Simple::saferun( '/usr/local/cpanel/scripts/cpservice', 'securetmp', 'disable', '2345' );
Cpanel::SafeRun::Simple::saferun( '/usr/local/cpanel/scripts/cpservice', 'securetmp', 'uninstall' );
}
# Add securetmp to system startup
if ($install) {
Cpanel::SafeRun::Simple::saferun( '/usr/local/cpanel/scripts/cpservice', 'securetmp', 'install' );
Cpanel::SafeRun::Simple::saferun( '/usr/local/cpanel/scripts/cpservice', 'securetmp', 'enable', '35' );
# Do not start securetmp here or it will be run again
}
}
#-----------------------------------------------------------------
# Fork and secure if not called from console
if ( $auto && !-t STDIN && $daemonize ) {
$SIG{'CHLD'} = \&reaper;
print "Setting up /tmp & /var/tmp in the background\n";
exit if fork;
}
elsif ( !$auto ) {
exit;
}
print "Securing /tmp & /var/tmp\n";
# Secure PATH
$ENV{'PATH'} .= ":/sbin:/usr/sbin";
my $cpconf = Cpanel::Config::LoadCpConf::loadcpconf();
my $use_custom_size = defined $cpconf->{'securetmp_file_size'};
# Global Variables
my $brokenvartmp = 0;
my @vnodes = ();
my $vnodeconfig = '';
my $vnodesrch = '';
my $vnodenumber = 0;
my $tmpmnt = '';
my $vartmpmnt = '';
my $tmpopts = '';
my $vartmpopts = '';
my $mountkeyword = '';
my $cpflags = '';
my $min_size = 512 * 1024; # 512MB
my $tmpdsksize = $use_custom_size ? $cpconf->{'securetmp_file_size'} * 1024 : $min_size;
$mountkeyword = 'remount';
$cpflags = '-af';
if ( open my $mounts_fh, '<', '/proc/mounts' ) {
while ( my $line = readline $mounts_fh ) {
# must detect: /dev/sda1 /var/tmp\040(deleted) ext2 rw,nosuid,noexec,usrquota 0 0
if ( $line =~ m/^(\S+)\s+([^\s\\\(]+)\S*\s+\S+\s+(\S+)/ ) {
if ( $2 eq '/tmp' ) {
$tmpmnt = $1;
$tmpopts = $3;
}
elsif ( $2 eq '/var/tmp' ) {
$vartmpmnt = $1;
$vartmpopts = $3;
}
if ( $1 =~ /^\/dev\/vn.*/ ) {
push @vnodes, $1;
}
}
if ( $line =~ m/\S+\s+\(deleted\)[^\/]*\/var\/tmp\s+/ ) {
$brokenvartmp = 1;
$vartmpmnt = '';
$vartmpopts = '';
}
}
close $mounts_fh;
}
else {
die "Unable to read /proc/mounts: $!";
}
# Begin securetmp actions
print "Calculating size on /tmp\n";
my $partition_map = {};
my $filesys = Cpanel::DiskLib::get_disk_used_percentage_with_dupedevs();
foreach my $disk ( @{$filesys} ) {
$partition_map->{ $disk->{'mount'} } = $disk->{'available'};
}
my $mount_point = Cpanel::Filesys::FindParse::find_mount( $filesys, '/usr/tmpDSK' );
my $available = $partition_map->{$mount_point};
if ($use_custom_size) {
if ( $tmpdsksize < $min_size ) {
$tmpdsksize = $min_size;
}
my $max_allowed = int( $available * 0.9 );
if ( $tmpdsksize > $max_allowed ) {
$tmpdsksize = $max_allowed;
}
}
else {
my $five_percent_of_available = ( $available * 0.05 );
if ( $five_percent_of_available > $tmpdsksize ) {
$tmpdsksize = $five_percent_of_available;
}
my $FOUR_GIG_k = ( 1024 * 1024 * 4 );
if ( $tmpdsksize > $FOUR_GIG_k ) {
$tmpdsksize = $FOUR_GIG_k;
}
}
$tmpdsksize = int($tmpdsksize);
$tmpdsksize = $tmpdsksize - ( $tmpdsksize % 1024 );
my $tmpdsksize_megs = ( $tmpdsksize / 1024 );
print "/tmp calculated to be $tmpdsksize_megs M based on available disk space in /usr\n";
# Check loop dev on Linux
if ( !$has_loop_device ) {
print "The system does not support loop devices.\n";
if ($brokenvartmp) {
print 'Unmounting orphaned /var/tmp ...';
system 'umount', '/var/tmp';
print "Done\n";
}
exit;
}
if ( -d '/usr/tmpDSK' ) {
rename( '/usr/tmpDSK', '/usr/tmpDSK.move_away.' . $$ . '.' . time() );
}
if ( !-e '/usr/tmpDSK' ) {
print "No separate partition for tmp!\n";
createtmpdisk('/usr/tmpDSK');
}
elsif ( -d '/usr/tmpDSK' ) {
die "/usr/tmpDSK exists as a directory. Please remove and rerun /usr/local/cpanel/scripts/securetmp.\n";
}
# ensure that /usr/tmpDSK is large enough
# or is the proper size if the tweak setting has been set
elsif ( ( -s '/usr/tmpDSK' ) < ( $tmpdsksize * 1024 ) || ( $use_custom_size && ( -s '/usr/tmpDSK' ) != ( $tmpdsksize * 1024 ) ) ) {
print "Your /tmp is the wrong size. Rebuilding it now.\n";
if ($tmpmnt) {
print "Unmounting /tmp ... ";
system 'umount', '/tmp';
$tmpmnt = '';
}
if ($vartmpmnt) {
print "Unmounting /var/tmp ... ";
system 'umount', '/var/tmp';
$vartmpmnt = '';
$brokenvartmp = 0;
}
system 'rm', '-f', '/usr/tmpDSK';
createtmpdisk('/usr/tmpDSK');
}
else {
print "Everything looks good with your /tmp. Its the right size and ready to go.\n";
}
if ( !$tmpmnt ) {
print 'Setting up /tmp... ';
if ( -e '/usr/tmp.secure' ) {
system 'mv', '-f', '/usr/tmp.secure', '/usr/tmp.secure.cpback';
}
mkdir '/usr/tmp.secure';
archivecopy( '/tmp', '/usr/tmp.secure' );
system 'rm', '-rf', '/tmp';
mkdir '/tmp';
chmod( oct(1777), '/tmp' );
my $mountresult = mounttmpdsk( '/usr/tmpDSK', '/tmp', $tmpopts );
archivecopy( '/usr/tmp.secure/tmp/.', '/tmp' );
chmod( oct(1777), '/tmp' );
system 'rm', '-rf', '/usr/tmp.secure';
if ($mountresult) {
die "There was a problem mounting /tmp: $mountresult";
}
print "Done\n";
}
elsif ( $tmpmnt && $tmpopts !~ m/noexec/ ) {
print 'Securing /tmp... ';
system 'mount', '-o', $mountkeyword . ',noexec,nosuid', $tmpmnt, '/tmp';
print "Done\n";
}
else {
print "/tmp is already secure\n";
}
if ( $brokenvartmp || ( $vartmpmnt && $vartmpopts !~ m/noexec/ ) ) {
print 'Unmounting insecure /var/tmp... ';
system 'umount', '/var/tmp';
$vartmpmnt = '';
$vartmpopts = '';
print "Done\n";
}
if ( !$vartmpmnt ) {
print 'Setting up /var/tmp... ';
if ( !-e '/var/tmp' ) {
mkdir '/var/tmp';
}
elsif ( !-d '/var/tmp' ) {
system 'mv', '/var/tmp', '/var/tmp.cpback';
mkdir '/var/tmp';
}
system 'mount', '-o', 'bind,noexec,nosuid', '/tmp', '/var/tmp';
print "Done\n";
}
else {
print "/var/tmp is already secure\n";
}
my $usingTMPDSK = 0;
if ( -e '/usr/tmpDSK' ) {
my $mount = `mount`;
if ( $mount =~ m/tmpDSK/ ) {
$usingTMPDSK = 1;
}
}
print 'Checking fstab for entries ...';
my $hastmpdsk = 0;
my $hasvartmpdsk = 0;
my $fslock = Cpanel::SafeFile::safeopen( \*FSTAB, '+<', '/etc/fstab' );
if ($fslock) {
while (<FSTAB>) {
if (/^\s*\/usr\/tmpDSK/) { $hastmpdsk = 1; }
if (/^\s*(\S+)\s*\/var\/tmp/) { $hasvartmpdsk = 1; }
}
if ( !$hastmpdsk && $usingTMPDSK ) {
print "Added fstab entry (/tmp)....";
print FSTAB "/usr/tmpDSK /tmp ext4 defaults,noauto 0 0\n";
}
if ( !$hasvartmpdsk && $vartmpmnt ) {
print "Added fstab entry (/var/tmp)....";
print FSTAB "/tmp /var/tmp ext4 defaults,bind,noauto 0 0\n";
}
Cpanel::SafeFile::safeclose( \*FSTAB, $fslock );
print "Done\n";
}
else {
$logger->die("Could not edit /etc/fstab");
}
my $logrotate = '/etc/cron.daily/logrotate';
if ( -e $logrotate ) {
my @logrotate_contents;
my $has_tmpdir = 0;
if ( open my $logrotate_fh, '<', $logrotate ) {
while ( my $line = readline $logrotate_fh ) {
if ( $line =~ m/TMPDIR/ && $line !~ m/^\s*#/ ) {
$has_tmpdir = 1;
last;
}
push @logrotate_contents, $line;
}
close $logrotate_fh;
if ( !$has_tmpdir ) {
my $updated_logrotate = 0;
if ( open my $logrotate_fh, '>', $logrotate ) {
foreach my $line (@logrotate_contents) {
if ( $line =~ m/^#!\/(?:usr|bin)/ ) {
print "Adding TMPDIR setting to /etc/cron.daily/logrotate\n";
print {$logrotate_fh} $line;
print {$logrotate_fh} "export TMPDIR=/var/spool/logrotate/tmp\n";
$updated_logrotate = 1;
}
else {
print {$logrotate_fh} $line;
}
}
close $logrotate_fh;
}
if ($updated_logrotate) {
if ( !-e '/var/spool/logrotate/tmp' ) {
system 'mkdir', '-p', '/var/spool/logrotate/tmp';
}
if ( !-d '/var/spool/logrotate/tmp' ) {
print <<'EOM';
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Logrotate detected and TMPDIR setting updated. The TMPDIR
directory (/var/spool/logrotate/tmp) does not exist!
Logrotate will need to use this directory for execution of
its postrotate scripts. This directory is normally /tmp, but
due to /tmp being set as non-executable an alternative
directory must be specified. Please correct this issue.
See /etc/cron.daily/logrotate to adjust the TMPDIR value for your system.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
EOM
}
}
else {
warn "Failed to update /etc/cron.daily/logrotate! Logrotate may be corrupt.";
}
}
else {
print "Logrotate TMPDIR already configured\n";
}
}
}
print "Process Complete\n";
Cpanel::Filesys::Mounts::clear_mounts_cache();
exit;
################################################################################
# createtmpdisk
################################################################################
sub createtmpdisk {
my $path = shift;
my $disk_size = shift || $tmpdsksize;
local $ENV{'LC_ALL'} = 'C'; # Force prompt processing to english
print "Building ${path}...";
if ( -e $path ) {
unlink($path);
}
my $disk_size_in_m = int( $disk_size / 1024 ) || 1;
my $bytes = 1024 * 1024 * $disk_size_in_m;
open( my $fh, '>', $path ) or die "Failed to open “$path”: $!";
truncate( $fh, $bytes ) or do {
die "truncate($path, $bytes): $!";
};
close($fh);
open( my $mkfs, "|-" ) || exec( "/sbin/mkfs", $path );
print {$mkfs} "yes\r\n";
close($mkfs);
if ( -e "/sbin/tune2fs" ) {
system( "/sbin/tune2fs", "-j", $path );
}
chmod 0600, $path;
print "Done\n";
return;
}
################################################################################
# archivecopy
################################################################################
sub archivecopy {
my ( $origin, $dest ) = @_;
my $cpflags = '-af';
return system( "cp", $cpflags, $origin, $dest );
}
################################################################################
# mounttmpdsk
################################################################################
sub mounttmpdsk {
my ( $disk_path, $mount_path, $current_mount_opts ) = @_;
$current_mount_opts //= '';
# Try to mount ext4 + discard first; if that fails, let the system detect the filesystem.
if ( $current_mount_opts !~ m/loop/ ) {
if ( system( 'mount', '-t', 'ext4', '-o', 'loop,noexec,nosuid,rw,discard', $disk_path, $mount_path ) ) {
system( 'mount', '-o', 'loop,noexec,nosuid,rw', $disk_path, $mount_path );
}
}
return (0);
}
sub test_loopback_device {
my $loopback_device = shift;
system( 'umount', '/usr/testDSK' );
createtmpdisk( '/usr/testDSK', 10240 );
my $tmpfile = Cpanel::TempFile->new();
my $test_mount_path = $tmpfile->dir();
mounttmpdsk( '/usr/testDSK', $test_mount_path );
my $loopback_status = Cpanel::SafeRun::Errors::saferunallerrors( 'losetup', $loopback_device );
system( 'umount', $test_mount_path );
unlink( '/usr/testDSK', $test_mount_path );
return $loopback_status =~ m/\Q$loopback_device\E:.*\/usr\/testDSK/i ? 1 : 0;
}
sub check_loop_device {
my $loopback_device = Cpanel::SafeRun::Errors::saferunallerrors( 'losetup', '-f' );
chomp $loopback_device;
return if !$loopback_device || !test_loopback_device($loopback_device);
return $loopback_device;
}
################################################################################
# reaper
################################################################################
sub reaper {
my $thedead;
while ( ( $thedead = waitpid( -1, 1 ) ) > 0 ) {
# the dead shall do what ?
}
$SIG{CHLD} = \&reaper;
}
Zerion Mini Shell 1.0
Video Chat en Casa - Ganar dinero haciendo videochat en casa - Page 2
Ir al contenido
Convierte tu perfil en una experiencia: un diseño que transmite profesionalismo, sensualidad y confianza, ideal para elevar tu marca personal en Chaturbate. Ver Demo Las instrucciones con imagenes estan disponibles…
Diseño creado para modelos que quieren destacar: visual atractivo, estructura clara y una presencia que engancha y retiene audiencia. Ver Demo Las instrucciones con imagenes estan disponibles en este articulo.…
Más que un perfil, una vitrina: este diseño está pensado para destacar tu imagen, comunicar tu estilo y atraer usuarios desde el primer vistazo. Ver Demo Las instrucciones con imagenes…
Haz que tu perfil trabaje por ti: un diseño limpio y sensual que resalta tu esencia, ordena tu información y convierte visitas en fans reales. Ver Demo Las instrucciones con…
Transforma tu perfil en Chaturbate con un diseño profesional y llamativo: este estilo potencia tu presencia visual, destaca tu personalidad y hace que tu bio sea más atractiva para los…
Diseño de perfil para Chaturbate: visual atractivo, estilo sensual y una atmósfera que invita a quedarse, interactuar y disfrutar de cada momento del show. Ver Demo Las instrucciones con imagenes…
Un espacio pensado para provocar curiosidad y conexión: miradas que hablan, conversaciones que fluyen y una experiencia íntima donde el respeto y la diversión van de la mano. Ver Demo…
Un perfil atractivo y divertido diseñado para conectar y entretener: invita a los visitantes a disfrutar, compartir momentos y explorar deseos con un toque abierto y juguetón, con reglas claras…
Una biografia con imagenes de fondo grandes, que se pueden cambiar con tus fotos (a peticion). Ten en cuenta que si decides personalizar el diseño, tus fotos deben ser tambien…
Una biografia con diversos elementos como bolsos, maquillajes, tacones… Todo esto, sobre un fondo blanco y repartidos en varias secciones. Ver Demo Las instrucciones con imagenes estan disponibles en este…